苏试英迈克 - 扬州英迈克,加速度传感器,激振器

Product Introduction

Dynamic Force Sensor (compression only): Side Output
Vibration Velocity Sensor
YMC Series Piezoelectric Vibration Velocity Sensors are solid state piezoelectric velocity measurement devices. Many vibration analysis prefer to examine vibration signals in terms of velocity (mm per second) to amplify the signal of interest. Piezoelectric Velocity Sensors inherently decrease high frequency signals allowing better measurement of low frequency vibration. They are essentially accelerometers with an internal integration circuit which will produce an output relative to velocity.
Features:
l Output proportional to vibration in velocity
l Mount at any angle
l Transmit signals over long distance without signal loss(4-20mA)
l Output to PLC, DCS, SCADA
High Shock Accelerometer
YMC Series the High Shock Accelerometer is specifically designed to withstand and measure extremely high–amplitude, transient acceleration of short duration. This series features high stiffness, quick response and high value of acceleration. It is widely applied in drop & impact testing and explosive studies etc. Measuring range is from 1000 to 100000g.
General Purpose Dynamic Force Sensor
General Purpose Accelerometer
YMC Series the General Purpose Accelerometer is designed by piezoelectric effect. Two output mode: high impedance output type (PE Mode) and low impedance voltage output type (IEPE Mode). This series is applied for structural testing, vibration control & testing, drop testing, quality testing, mechanical equipment study, modal vibration testing etc.