Quartz Dynamic Force Sensors & Impedance Head
YMC series Quartz Dynamic Force sensors are used to measure dynamic or quasistatic tensile or compression forces. It has a high rigidity and thus a high natural frequency. The high resolution allows to measure low dynamical changes of large forces.
1. Dynamic Force Sensors (compression only):Side output
YMC 501F Series dynamic force sensors (compression only).Applications for :packaging drop test, impact test, cyclic impact, collision test, punching machine, punching, etc. | 
| 
|
501F01-1(IEPE output) | 501F01,501F02,501F03,501F03PE |
Model:YMC | Sensitivity | Resonant Frequency | Measurement Range | Resolution | Temperature Range | Weight | Output Type | Size mm |
501F01-1 | 10 mV/N | ≥50 kHz | 500 N | 2 mN | -40 - +121℃ | 9 Gram | M3 | Φ15X7.5 |
501F01 | 10 mV/N | ≥50 kHz | 500 N | 2 mN | -40 - +121℃ | 20 Gram | M5 | Φ18X10 |
501F02 | 2.5 mV/N | ≥50 kHz | 2 kN | 10 mN | -40 - +121℃ | 20 Gram | M5 |
501F03 | 1 mV/N | ≥50 kHz | 5 kN | 20 mN | -40 - +121℃ | 20Gram | M5 |
501F03PE | 4 pC/N | ≥50 kHz | 5 kN | - | -70 - +200℃ | 17 Gram | M5 |
2. General purpose Dynamic Force Sensors (tensile/ compression)
YMC502F Series dynamic force sensors,Apply for he dynamic tensile and compression, impact and repeated applications, drop testing, material testing, etc;Pay attention to when the choice, pressure Measuring Range is different; | 
|
Model:YMC | 502F01 | 502F02 | 502F03 | 502F03PE |
Sensitivity | mV/N | 10 | 2.5 | 1 | 4 pC/N |
MeasurmentRange | N pk | ±500 | ±2000 | +5kN,-2kN | 5kN,-2kN |
Nonlinearity | % | ≤1 | ≤1 | ≤1 | ≤1 |
Resonant Frequency | kHz | 60 | 60 | 60 | 60 |
Temperature Range | ℃ | -40 - +121 | -40 - +121 | -40 - +121 | -70 - +200 |
Resolution | mNrms | 6 | 25 | 50 | - |
Low Frequency | Hz | 1 | 1 | 1 | 0.3 |
Output type |
| M5 | M5 | M5 | M5 |
Size | mm | Φ18X19 | Φ18X19 | Φ18X19 | Φ18X19 |
Weight | g | 30 | 30 | 30 | 27 |
3. Dynamic Force sensors (compression only):Top output mode
YMC512F Series dynamic force sensors, Apply for special occasions, need from Top output products, single direction of pressure.Such as pulse force hammer, etc.;Used in the packaging drop test, impact test, cyclic impact, collision testing, punching machine, punching, modal test, etc.. | 
|
Model:YMC | 512F01 | 512F02 | 512F03 | 512F04 | 512F05 | 512F06 |
512F01PE | 512F02PE | 512F03PE | 512F04PE | 512F05PE | 512F06PE |
Sensitivity | mV/N | 5 | 2.5 | 1 | 0.5 | 0.1 | 0.1 |
pC/N | 4 | 4 | 4 | 4 | 4 | 2 |
MeasurmentRange | kN pk | 1.0 | 2.0 | 5.0 | 10 | 50 | 100 |
Nonlinearity | % | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Resonant Frequency | kHz | 70 | 70 | 70 | 65 | 65 | 50 |
Temperature Range | ℃ | -40 - +150 | -40 - +150 | -40 - +150 | -40 - +150 | -40 - +150 | -40 - +150 |
Resolution | mNrms | 20 | 50 | 100 | 250 | 1000 | 2000 |
Low Frequency | Hz | 1 | 1 | 1 | 0.5 | 0.5 | 0.3 |
Output type |
| M5 | M5 | M5 | M5 | M5 | M5 |
Size | mm | Φ14╳30 | Φ14╳30 | Φ14╳30 | Φ26╳34 | Φ26╳34 | Φ48╳56 |
Weight | g | 20 | 20 | 20 | 58 | 58 | 310 |
4. Dynamic Force Sensors (compression only): Link

| 
|
YMC511F Series:link, compression only | YMC511FSeries:clamp for Tension and compression |
Model:YMC | 511F01 | 511F02 | 511F03 | 511F04 | 511F05 | 511F06 | 511F07 | 511F08PE |
Sensitivity | mV/N | 10 | 2.5 | 1 | 0.5 | 0.1 | 0.05 | 0.02 | 2 pC/N |
MeasurmentRange | kN pk | 0.5 | 2 | 5 | 10 | 50 | 100 | 250 | 500 |
Nonlinearity | % | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Resonant Frequency | kHz | 70 | 70 | 70 | 50 | 50 | 40 | 35 | 25 |
Temperature Range | ℃ | -40 - +121 | -40 - +121 | -40 - +121 | -40 - +121 | -40 - +121 | -40 - +121 | -40 - +121 | -70 - +200 |
Resolution | mNrms | 10 | 50 | 120 | 250 | 1250 | 2500 | 5000 | - |
Low Frequency | Hz | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.3 |
Output type |
| M5 | M5 | M5 | M5 | M5 | M5 | M5/TNC | M5/TNC |
Size | mm | Φ18XΦ6X10.5 | Φ18XΦ6X10.5 | Φ18XΦ6X10.5 | Φ26XΦ8X12.5 | Φ26XΦ8X12.5 | Φ46XΦ20X13 | Φ60.5XΦ26.5X17 | Φ95XΦ40.5X23 |
Weight | g | 24 | 24 | 24 | 30 | 30 | 85 | 250 | 780 |
5. 3-component Dynamic Force Sensors
YMC 503F Series 3-component Dynamic Force sensors |
YMC 503F series 3-component can simultaneously monit or ing dynamic force three orthogonal directions (X, Y, Z).The sensor provides two with four screw hole assembly splint, respectively fixed on both sides of the sensor .Apply for force limited vibration test, dynamometer, modal analysis, the cutting force test, etc.Charge and IEPE output optional. | 
|
Model:YMC | 503F01 | 503F02 |
Sensitivity | mV/N | Fx/ Fy:2 Fz:1 | Fx/ Fy:0.3 Fz:0.15 |
MeasurmentRange | kN pk | Fx:Fy:2.5 Fz:5 | Fx:Fy:15 Fz :30 |
Nonlinearity | % | ≤1 | ≤1 |
Resonant Frequency | kHz | 10 | 10 |
Temperature Range | ℃ | -54 - +121 | -54 - +121 |
Resolution | N rms | X:Y:0.015;Z:0.03 | X:Y:0.15;Z:0.3 |
Low Frequency | Hz | X:Y:1; Z:1 | X:Y:0.5; Z:0.5 |
Output type |
| 3-M5 | 3-M5 |
Size | mm | 55X 55X60 | 80X 80X90 |
Weight | g | 1000 | 3000 |
6. Impedance Head (Force +Acceleration)
YMC504Fseries Mechanical Impedance Sensor s simultaneously measure an applied, driving-point force and response acceleration of a test structure for determining parameters such as mechanical mobility and mechanical impedance. The unit consists of a precision accelerometer and a quartz force Sensor in a common housing. Installation is primarily facilitated at the structural excitation points, in series with a stinger and vibration shaker. | 
|
Model:YMC | Sensitivity | Frequency Range (±10%) | Measuring Range | Resolution | Temperature Range | Output Type | Mounting Type | Weight | Size |
504F01 | A | 50mV/g | 0.5Hz -5kHz | ±100g | 1mg | -40~+121 | M5 | 2-M5 | 30Gram | Φ20×27mm |
F | 5mV/N | ≥55kHz | ±1000N | 5mN | M5 |
504F02 | A | 100mV/g | 0.5Hz-5kHz | ±50g | 0.5 mg | -40~+121 | M5 | 2-M5 | 30Gram | Φ20×27mm |
F | 10mV/N | ≥55kHz | ±500N | 2.5mN | M5 |
504F01PE | A | 50pC/g | 0.5Hz-5kHz | ±500g | - | -54~+150 | M5 | 2-M5 | 28Gram | Φ20×27mm |
F | 4pC/N | ≥50kHz | ±1000N | - | M5 |