IEPE Sensor Signal Conditioners
The IEPE sensor signal conditioner not only supplies power to the sensor, but also amplifies and filters the output signal of the sensor.The IEPE signal conditioner provides the constant current excitation source for the IEPE sensor.The capacitive transducer provides the power needed for the capacitance sensor to work.Multifunctional signal conditioning YMC3834 not only for IEPE sensors, capacitive sensors, strain sensor etc to provide working power supply, as well as the sensor output signal amplification and processing such as filtering.

| YMC 8201 Battery-powered IEPE sensor signal conditioner; Small size, light weight; Wide frequency range; LEDs operation status indicator; Low-battery warning; Internal or external power supply; Suitable for filed test. Battery-powered IEPE sensor signal conditioner; Small size, light weight; Wide frequency range; LEDs operation status indicator; Low-battery warning; Internal or external power supply; Suitable for filed test. |

| YMC8201T:Single channel, Miniature IEPE sensor signal conditioner. External DC power supply, small size, light Weight.Can provide excitation source or IEPE sensors, power supply and the IEPE sensors recuperated the output signal amplifying, filtering and so on. |

| YMC8204:4 channels IEPE sensor signal conditioner; Selectable current (4 or 10 mA); Selectable gain 1 to 100; Two types of output connector; Wide frequency range; For monitoring normal or faulty circuit condition by status LEDs; . Wide Frequency Response, Low Noise, Good Stability;Gain,Excitation Current Switchable; Apply for IEPE Transducer’s general test. |

| YMC3832: MEMS sensor signal conditioner, can power for triaxial capacitive sensor ; Built-in Selectable Low-pass filters,Gain.Can input 3 chs MEMS sensor’s input. |

| YMC8208/8216:8/16 channels IEPE sensor signal conditioner; Selectable current (4 or 10 mA); Selectable gain 1 or 10; Two types of output connector; Wide frequency range; For monitoring normal or faulty circuit condition by status LEDs; Dimensions:44mm x 430mm x 240mm (19 inches case). |

| YMC 3834:multi-functional, multi-input mode condinioner. Support differential (bridge), Voltage, IEPE etc. 4 chs combination, provide bridge voltage, amplification, High and low pass filtering and other functions. Can directly connect to the strain sensor, MEMS sensor, IEPE sensors and voltage output mode sensors. |
YMC | Channels | Input Type | Gain | Frequency Range | Excitation Voltage | Excitation Current | Input/output Type | Size mm | Weight | Power Supply |
8201 | 1 | IEPE | 1,10 | 0.3Hz - 100kHz | 24VDC | 2mA | BNC/BNC | 26×66×100 | 300g | Built-inRechargeable batteries |
8201T | 1 | IEPE | 1(Adjustble) | 0.3Hz - 100kHz | 24VDC | 2mA | BNC/BNC | 44×17×50 | 55g | External DC supply |
8204 | 4 | Voltage IEPE | 1,10,100 | 0.3Hz - 100kHz | 24VDC | OFF,4mA, 10mA,20mA | BNC/BNC | 45×122×200 | 1.4kg | 220V50Hz0.2A |
8208 | 8 | IEPE | 1,10 | 0.3Hz - 100kHz | 24VDC | 4mA | BNC/BNC | 482×44×240 | 3.8kg | 220V50Hz0.2A 110V60Hz1A |
8216 | 16 | IEPE | 1,10 | 0.3Hz - 100kHz | 24VDC | 4mA | BNC/BNC | 482×44×240 | 3.8kg | 220V50Hz0.3A 110V60Hz1A |
3832 | 3 | Voltage | 1,2,4, 8,10 | DC - 30kHz | 9VDC | 20mA | 7 pin/BNC | 45×122×200 | 1.0kg | 220V50Hz0.2A |
3834 | 4 | IEPE /Voltage/ differential (bridge) | Adjustble | DC - 100kHz | Adjustble | 4mA | 7 pinBNC/BNC | 273×89×317 | 2.5Kg | 220V50Hz0.3A |